PROALL P Series, Service Manual, Page: 34 / 118

34
5.7 ELECTRICAL
5.7.1 SOLENOID INDICATORS

The hydraulic solenoid valves have connectors that light
up when power is applied. This is a useful tool in
troubleshooting and can be used as a quick visual indication
that a function is being actuated.

Each wire is also labeled with the associated function name
. This label can be used to verify if the correct cable is
connected to the correct valve or just for general valve
identification.
5.7.2 CONTINUITY AND CURRENT DRAW

The current draw for individual functions can be found in
the Electrical Diagnostics screen. By touching the function
name a green box will appear allowing the user to rotate
the knob on the display and select the desired functions
current output.

The output is shown in mA and is available to all functions
that use variable output signals including higher current
outputs such as the admix pumps.

Power module status shows error codes from the power
module. This includes open and short circuits. This applies
to vibrators and the admix pumps that are powered by this
module.
B
A
A
B
A
B
A
B