pg. 11
Operator’s Manual,
Ranger Gunite r1.0
1.06 TOTALS
1.
Print a ticket by touching this button.
2.
Menu shortcut. Return to the main menu.
3.
Home shortcut. Return to the home screen.
4.
Reset totals by touching this button. A reset acknowledgment screen will appear. The operator must select
“
yes
”
to finish the reset of totals and log the job to the memory.
5.
Totals are calculated using values from the mix design database and belt counts.
6.
Press this button if Sand is to be unloaded without cement. The cement total will not calculate, but it will log an
aggregate unload event in the mix log.
7.
Auto reset ON will activate the totals reset page after the ticket print has been completed. The reset screen will
still appear if a reset is not desired and
“
no
”
can be selected to skip the reset.
8.
Total volume produced before a reset. This value is the same on the home screen.
1
2
3
4
5
6
7
8