2
Join Support Arm with Section on Support
Jacket, by simple push-fit technique.
Wear Support Jacket and tighten the buckles
provided at waist and chest. Then adjust until
you find it comfortable.
Slightly loosen all four Adjustment Knobs
provided on back of Support Jacket to adjust
the height of Support Arm.
Flowline
Setup
Adjust Support Arms on both sides. This will
fine tune your Jacket to a comfortable
position and also help in shifting weight to
your shoulders and hips.
Loosen the knob on hook and attach camera
with it. Tighten the knob back to ensure
slip-free connection.
NOTE:
Leave a gap of approximately 2cm/1”
between the top of Camera Hook and Support
Arm.
