TRAVELER 4all Ergo & 4you Ergo usage instructions
46
rect position by opening the M6 fastening
clamp screws (AF 5 mm) on the footrest sup-
port plates. View the procedure in Chapter
24.1.
24.7 Swing away footrest
Figure 124: Swing away footrest,
in standard position
To
fold up
one of the two footrest parts, grasp
it and fold it up to the side. Moreover, you can
also turn or pivot the footrest outwards.
Figure 125: Both footrest parts folded up and pivot-
ed outwards
To
remove
the footrest parts, place the locking
pin lever vertical to the bracket towards the
front on both sides and then pull both footrest
parts upwards out of the bracket.
Figure 126: Moving locking pin lever perpendicular
to remove swing away footrest
Figure 127: Swing away footrest removed
To
adjust the length of the footrest support
tubes or adapt the lower leg length
, the M6
fixing screws (AF 4 mm)
must be released on
both sides. The footrest support tubes are then
pushed along their slots and thus brought into
the correct position. Observe that the footrest
support tubes are both the same length on
both sides after they have been adjusted.
Move the locking pin lever
perpendicular to the bracket
Locking pin lever
