5
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
W
hen this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area.
SPECIFICATIONS
Voltage/Current
DC 12V/3A
Power consumption
TX: <32W RX: <6W
HDMI compliance
HDMI 2.0
HDCP compliance
HDCP 2.2
Supported resolutions
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
3840x2140@30/60Hz
IR signal
Supports 20~60KHz IR device
CAT6/6A/7
<30m
Working temperature
0~60°C
Storage temperature
-20~70°C
Humidity
0~90%RH (no condensation)
Dimension
TX: 212.6(L) x 102.4(W) x 31.0(H)mm
RX: 101.0(L) x 81.6(W) x 20.6(H)mm
Material
Aluminium alloy
Weight
TX: 575g RX: 190g
IR User Guide:
•
IR receiver extension cables should be connected to the IR IN port of the receivers.
Only use one remote control in one location at a time to avoid conflict.
•
The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
•
The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
•
Face the receiving head of the IR receiver extension cable toward the user for
unobstructed line of sight to the remote control.
•
The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.
CLEANING & MAINTENANCE
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
Man Rev 1.0
Made in China. PR2 9PP
