Orion
Sentry by Orion
Revision 2.8
Semi-Automatic Stretch Wrapping Machine
27 August 2014
System Operation
Page 3-3
Operating Procedures
Loading The Film
The film roll can be loaded on the carriage mandrel from either end of the roll. When
using tacky film, verify that the tacky surface of the film is inward on the load.
1.
Remove the top mandrel spool.
2.
Put the roll of film on the bottom mandrel.
3.
Install the top mandrel on top of the roll to prevent upward movement.
4.
Pull down the carriage open lever and pivot the carriage door open.
5.
Pass the roped tail of the film through opening.
6.
Thread the film around the spools, as shown.
Figure 3 - 2
Top Mandrel
Figure 3 - 3
Film Threading
Figure 3 - 4
Film Threading
