Machine Manual
Orion
Sentry HP/ LP Flex Stretchwrapper
Revision 3.1
System Operation
21 May 2020
Page 3-24
Machine Settings Screens
Machine Settings Screen
This is the Machine Settings Screen. This screen allows access to each of the machine set-
ting adjustments.
Figure 3 - 20
The Machine Settings
Screen
Table 3-16. The Machine Settings Screen Button Descriptions
STATE 1
DESCRIPTION
MAIN DRIVE
Press this button to go to the Main Drive Screen. See “Main Drive Screen” on
page 3 - 26.
REINFORCE
Press this button to go to the Reinforce Screen. See “Reinforce Wrap Setup” on
page 3 - 27.
TIMERS
Press this button to go to the Timers Screen. See “Sentry Carriage Timers Screen”
on page 3 - 28.
MACHINE SETUP
Press this button to go to the Machine Setup Screen. See “Orion Carriage Timers
Screen” on page 3 - 29.
FACTORY DEFAULTS
Press this button to go to the Factory Defaults Screen. See “Factory Defaults
Screen” on page 3 - 32.
MULTISTRETCH
Press this button to go to the Multistretch Screen. See “Sentry Carriage Multistretch
Settings Screen” on page 3 - 34.
VFD PARAMETERS
Press this button to go to the VFD Parameters Screen. See “Orion Carriage Mul-
tistretch Settings Screen” on page 3 - 35.
