Pro Mach ORION Sentry HP Manual Download Page 53

Page: 53 / 100

Orion

Machine Manual

Revision 3.1

Sentry HP/ LP Flex Stretchwrapper

21 May 2020

System Operation

Page 3-21

Film Usage Settings Screen

This is the Film Usage Settings screen. This screen allows you to view the film usage
weight based on the load dimensions, film gauge, and prestretch setting.

Figure 3 - 18

The Film Usage

Settings Screen

Table 3-14. The Film Usage Settings Screen Button Descriptions

STATE 1

DESCRIPTION

FILM USAGE GOAL

Press the numeric display to enter the film usage goal, in ounces.

LOWER SPEC LIMIT

Press the numeric display to enter the film lower spec limit, in percentage.

UPPER SPEC LIMIT

Press the numeric display to enter the film upper spec limit, in percentage.

PALLET LENGTH

Press the numeric display to enter the pallet length, in percentage.

PALLET WIDTH

Press the numeric display to enter the pallet width, in percentage.

FILM GAUGE

Press the numeric display to enter the film gauge used to calculate the film usage.

PRE-STRETCH

Press the numeric display to enter the prestretch percentage used to calculate the
film usage.

FILM WIDTH

Press the numeric display to enter the film width to calculate the film usage.

HOURLY GOAL

Press the numeric display to enter the hourly film usage goal, in ounces.

WORKING HOURS

Press the numeric display to enter the working hours for film usage calculations.

STANDARD RECIPE TOP

WRAPS

Press the numeric display to set the standard recipe top wrap count for film usage
calculations.

STANDARD RECIPE

BOTTOM WRAPS

Press the numeric display to set the standard recipe bottom wrap count for film
usage calculations.

Summary of Contents for ORION Sentry HP





































































































Search results

Summary of Contents for ORION Sentry HP

Reviews:

Related manuals for ORION Sentry HP

Brands by name

Popular brands

Pro Mach ORION Sentry HP, Manual

Search results

Summary of Contents for ORION Sentry HP

Reviews:

Related manuals for ORION Sentry HP

Brands by name

Popular brands