3.
Page 3-1
Orion
Machine Manual
Revision 3.1
Sentry HP/ LP Flex Stretchwrapper
21 May 2020
System Operation
System Operation
Operating Procedures
How to Start and Shut Down Your Wrapping System
Note:
Do not use extension cords. Plug your Flex Stretch-wrapper directly
into an outlet.
POWER SWITCH
Located on the panel door, the lockable power switch has two settings:
•
ON - connects a power source to the machine.
•
OFF - disconnects the power source.
START AND EMERGENCY STOP SWITCHES
•
Press the
START
button to gain Control Power prior to starting.
•
The
START
switch is used to start the cycle once the load is available.
•
The cycle may be stopped at anytime by pressing the
E-STOP
button.
Figure 3 - 1
Sentry LP HMI
Start/ Reset Button
E-Stop Button
Power Switch
HMI (Human Machine Interface)
