Pro Mach Orion CTS Flex Stretchwrapper, Manual

Page: 52 / 132

Machine Manual Orion
CTS Flex Stretchwrapper Revision 3.0
System Operation 25 July 2016
Page 3-22
Reinforce Wrap Setup
This is the Reinforce Wraps Setting Screen. This screen allows the user to set the number
of reinforce wraps that are applied when the reinforce button on the Run Screen is pressed.
Figure 3 - 16
The Reinforce Setup
Screen
Table 3-15. The Reinforce Wraps Screen Button Descriptions
STATE 1 DESCRIPTION
REINFORCE WRAPS
Press this button to set the number of reinforce wraps that are applied when the
enable reinforce wraps button is pressed on the Run screen.