
46
Cabin Portholes - Two portholes complete with screens are
installed in the main cabin. One is located in the galley and the
other is located in the head. To open the porthole window,
loosen the 3 star nuts by turning them in a counter clockwise
direction. Then, rotate each of the star nuts down/away from the
plastic window; the window is hinged at the top. Once the star
nuts are out of the way, lift the window open and away from the
frame by pulling on the phalanges at the bottom of the window.
When finished, close the window, rotate each of the star nuts
back into place and turn the star nuts in a clockwise direction to
secure the window.
Cabin Hatches - A pair of cabin hatches complete with screens is
installed in the ceiling of the main cabin. To open the window, remove
the screen, turn both levers forward and push the hatch open to the
desired position. To hold the hatch in place, tighten the black plastic
cylinders on both of the mounting arms. Then replace the screens. DO
NOT allow passengers to sit or stand on the hatches as they could
break the hatches. The hatches should be in the closed and latched
position when the vessel is underway.
Windows/Hatches Installed on Fiberglass Hard Top – Two (2) small windows/hatches are installed on the
fiberglass hard top. To open the window, pull the black lever aft and push the hatch open to the desired
position. To hold the hatch in place, tighten the black plastic knobs on the support arms. To close the
window, loosen the black plastic knobs on the support arms and allow the window to move back to the
closed position. Then, push the lever forward to secure the hatch. The hatches should be in the closed
and latched position when the vessel is underway.
Note: The hatches in the fiberglass hard top are not available with the installation of the
optional tower.
Windshield with Vent
The windshield assembly is constructed of white powder coated
aluminum, tempered glass and acrylic. The windshield vent in the
center of the windshield assembly can be opened and closed to allow
air circulation at the helm. The switch that operates the windshield
vent is a “3 position momentary switch” which is only active when the
button is depressed.
3 Star Nuts
Interior View
Exterior View