12
Electronic Throttle & Shift Controls (Optional)
Some engine packages (i.e., Mercury Verado, Mercury Opti Max DTS, etc.) include Electronic Throttle &
Shift Controls. This option is also available as an option for all other engine packages. The Electronic
Throttle & Shift Controls provide easier shift and throttle functions and little or no resistance. You may
occasionally feel some friction at the binnacle but this can be adjusted at the binnacle per the instructions
provided by the engine manufacturer.
If your engine package includes the optional Electronic Throttle & Shift Controls and you have purchased
the optional Tower for the Hard Top, the Tower controls will also be electronic.
Shift / Throttle / Trim
Your Pro-Line can be ordered with different shift/throttle systems based upon motor type. Refer to the
owner's packet to find the manual pertaining to your particular installation. Each motor has an individual
tilt/trim switch located on the port throttle lever. Separate shift and throttle controls are available for each
outboard motor.
The throttle lever has three range positions: “Forward”, “Neutral”, and “Reverse”. The shift function
occurs in the first portion of the lever travel. After the transmission is shifted into gear, further movement
of the lever advances the throttle.
Push the throttle lever ahead to move forward and pull it back for reverse. Centralize the lever to the
detent for neutral. The throttle lever is equipped with a neutral safety switch to prevent the motor from
starting in gear. The initial short movement of the lever to engage the transmission should be made firmly
to avoid causing gear clash.
CAUTION: Use care in shifting to avoid advancing the throttle more than intended.
Steering - Hydraulic with Tilt Steering
Steering systems will differ depending upon your selection of engine package. Please carefully read the
owner’s manual provided by the specific manufacturer.