20
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
To access the internet, download iFIT workouts,
and use several other features of the console, you
must connect the console to a wireless network.
Follow the prompts on the screen to connect the
console to your wireless network.
2. Customize
settings.
Fill in the form on the screen to set the console
to display the desired unit of measurement and
your time zone. Note: If you need to change these
settings later, see HOW TO CHANGE CONSOLE
SETTINGS on page 26.
3. Log into or create an iFIT account.
Provide your email address, and follow the prompts
on the screen to sign up for or log into your iFIT
account.
4. Check for firmware updates.
First, touch the menu button (three horizontal lines
symbol), touch
Settings
, touch
Maintenance
, and
then touch
Update
. The console will check for
firmware updates. See step 5 on page 26 for more
information.
5. Calibrate the incline system.
First, touch the menu button (three horizontal lines
symbol), touch
Settings
, touch
Maintenance
, touch
Calibrate Incline
, and then touch
Begin
to calibrate
the incline system. See step 6 on page 26 for more
information.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode,
see page 21.
To use a
featured workout,
see page 22.
To create a draw-
your-own-map workout,
see page 24.
To use an iFIT
workout,
see page 25.
To view or change console settings,
see page 26.
To connect to a wireless network,
see page 27.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 31).
