Pro-face PS-3700A, User Manual, Page: 120 / 131

Chapter 7 Specifications
7-5
7.2 Performance Specifications
7.2.1 Performance Specifications
*1 If “Serial” is selected, COM4 cannot be used.
CPU Pentium
®
4 Processor-M 1.7GHz (Intel Corporation)
DRAM(SO DIMM) DIMM Socket 1: 256MB/512MB Max.512MB)
BIOS FirstBIOS (Phoenix Technologies Co.)
Graphics XGA (1024 x 768 dots)
Video Memory Max.64MB (When using Windows
®
) UMA Type
T
o
uc
h Pan
el
Type Resistive Film (Analog)
Resolution 1024 x 1024
Interface
COM4
<Switching via hardware>
Use the touch panel communication switch to select whether to
use the serial communication (COM4) interface or the USB
communication interface. *
1
1.4.1 Serial Interface (COM1/COM2/COM3/COM4)
‹
Switches (page1-9)
<Switching via Software>
When installing the mouse emulation software (UPDD), select
whether to use the serial communication (COM4) interface or
the USB communication interface.
USB
In
terf
ace
Serial
(RS-232C)
COM1 D-sub 9 pin male (RI/+5V switch possible.)
COM2 D-sub 9 pin male (RI/+5V switch possible.)
COM3 D-sub 9 pin male (RS-422/RS-485 switch possible.)
COM4 D-sub 9 pin male
Printer
Complies with Centronics Standards (ECP/SPP/EPP equivalent)
(D-Sub 25 pin, female)
Keyboard PS/2 Interface (mini DIN 6 pin, female) rear 1 port
Mouse PS/2 Interface (mini DIN 6 pin, female) rear 1 port
Disk IDE I/F
Master 2.5inch HDD I/F
Slave CF Card I/F (Not hot-swappable)
USB
USB 1.1 compatible front 1 port
USB 2.0 compatible rear 2 ports
LAN
IEEE802.3 Standards (auto change to 10 Base-T/100 Base-TX)
rear 1 port
PCMCIA Type II side 2 ports
Sound
LINE IN, SPEAKER OUT, MIC IN
rear 3 ports (standard type AUDIO jack)
PCI Rev.2.2 compatible PCI I/F(5V) 1 Slot
Floppy Disk Drive Side Access, For 2-mode 3.5 inch floppy disk drive
CD-ROM Drive Side Access, CD-ROM Drive (connected to IDE Secondary)
SEE