Pro-face Pro-face ST Series, User Manual

Page: 83 / 131

ST Series User’s Manual
6-14
SYSTEM RESET MODE
Designates whether to display or hide the Menu Bar. The Menu Bar can be displayed using the following pro-
cedure when "ON" is selected
Steps to run SYSTEM RESET
While pressing down on the bottom right corner (1) of the screen, press the upper right corner (2). At the same
time, press the bottom left corner (3) to enter the FORCE RESET Operation. To activate Reset, press the
RESET button, to transfer to OFFLINE Mode, press OFFLINE.
CONTRAST ADJUSTMENT
When this option is set ON, CONTRAST ADJUSTMENTs can be made through touch input.
While pressing the upper right hand corner (1) of the screen, press the upper left corner (2) to enter CON-
TRAST ADJUSTMENT mode. Press the desired setting and the screen's contrast will change accordingly.
• FORCE RESET can occur during either RUN mode or OFFLINE mode.
• The SYSTEM RESET mode cannot be entered while the ST is starting up.
• Entering SYSTEM RESET is possible even when RUN operations
(PLC <—> ST communication) are not being performed.
• Be sure to press the ST corners in the order shown. If only corner (2) is pressed OFFLINE mode
will start.
1
2
3
Bright Dark
1
2