Pro-face Pro-face ST Series, User Manual

Page: 122 / 131

Chapter 7 RUN Mode and Errors
7-23
7.5.8 Extended SIO Script Error
The following error message is displayed when an Extended SIO Script is not configured properly. The ST
Series unit displays the error message on the bottom at the ST screen.
The following table lists the numbers assigned to (***) in the above error message. Error No. 001 is displayed
at power-on, and Error Nos. 003 and 004 are displayed when an error occurs during the function processing.
Error Message
Extended SIO Script Extended SIO Script Error (***)
No. Description
001
The total number of the Functions of Extended SIO Scripts exceeds the limit.
The maximum number of Functions of Extended SIO Scripts is 254.
002 Reserved
003 The function that is being called does not exist.
004 Functions cannot be nested more than 10 levels.
005
An old Extended SIO Script protocol is being used for the ST system. Extended SIO
Script cannot be run when this error occurs. Be sure to install and run a new Extended
SIO protocol (Version 1.12 or later).
006
An incompatible function was found in the screen data's Extended SIO Script. Be sure
to install and run a new ST system.