Pro-face Pro-face ST Series, User Manual

Page: 108 / 131

Chapter 7 RUN Mode and Errors
7-9
7.3.2 No Display
Follow the flowchart below when the screen does not display when powering up, or the screen turns OFF by
itself during RUN mode, to find an appropriate solution.
No Screen Display
Transfer screen data from the screen
editing software.
4 Data Transfer (Page 4-1)
Has data transferred
from the Screen editor?
Does the Power
Lamp light turn ON?
Is it using the correct
rated voltage?
Unplug the ST’s power cord.
Disconnect the SIO and AUX cable.
Is the power cable
connected properly to
this unit?
Does turning
ON the power one more
time cause a display?
Use the correct rated voltage.
2 Specifications (Page 2-1)
Fix the power cable connection.
3 Installation and Wiring
(Page 3-1)
Turn Off the power and reconnect the SIO
cable, or the AUX cable.
Does turning
the power ON one
more time start t
he display?
The SIO cable
may not be
connected
properly.
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
SEE
SEE
SEE
NO