Pro-face PL-DK210, Installation Manual, Page: 7 / 8

-7-
4) Connect the PL-DK210 unit to the
PL unit via the connection cable.
Be sure to confirm that the Cable's
#1 pin mark and the connector are
correctly aligned.
Do not connect anything
to the DC INPUT Connec-
tor.
5) Secure the PL-DK210 unit to the
PL unit using the four (4) attach-
ment screws. Place the cable in the
aperture between the PL-DK210
and PL units.
Caution
Refer to the following drawings to confirm that the connection cable
is securely attached to both connectors. Be sure to check both connectors
before turning the PL ON, since incorrect attachment of the connectors
can cause equipment damage.
X X
!
DC INPUT
IDE INTERFACE
#1 pin mark Cable's #1 pin mark