Chapter 5 - System Setup
5-16
PL-5910 Series User Manual
Selecting the PnP/PCI CONFIGURATION menu item Displays the following screen.
Reset Configuration Data
Designates whether ESCD (Extended System Configuration Data) data should be
erased or not. The two selections available are [Disabled] and [Enabled]. The [Dis-
abled] selection is factory set and recommended for most users.
Resources Controlled By
The Plug-and-Play feature allows you to designate whether the allocation of I/O Port,
IRQ and DMA resources is performed automatically or manually. The two selections
available are [Manual] or [Auto(ESCD)]. If [Auto(ESCD)] is selected, the IRQ Re-
sources and DMA Resources selection will be disabled. The [Auto(ESCD)] selection is
factory set and recommended for most users.
IRQ Resources
When resources are controlled using [Manual], manually set each IRQ assignment.
Press the [Enter] key to display the IRQ setting menu.
5.2.8 IRQ Resources
DMA Resources
When [Resources Controlled By] is set to [Manual], manually set each DMA assign-
ment. Press the [Enter] key to display the DMA setting menu.
5.2.9 DMA Resources
PCI/VGA Pallet Snoop
The two selections available are [Disabled] and [Enabled]. The [Disabled] selection is
factory set and recommended for most users. However, if a VGA or MPEG board is
used, set thsi to [Enabled]. For setting details, refer to your VGA or MPEG board's
Installation guide.
↑↓→←
:
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix First BIOS
(tm)
Desktop CMOS Setup Utility
PNP/PCI Configurations
Item Help
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
Reset Configuration Data
[Disabled]
Resources Controlled By
[Auto(ESCD)]
x
IRQ Resources
Press Enter
x
DMA Resources
Press Enter
PCI/VGA Palette Snoop
[Disabled]
Assign IRQ For VGA
[Disabled]
INT Pin 1 Assignment
[Auto]
INT Pin 2 Assignment
[Auto]
INT Pin 3 Assignment
[Auto]
INT Pin 4 Assignment
[Auto]
INT Pin 5 Assignment
[Auto]
INT Pin 6 Assignment
[Auto]
INT Pin 7 Assignment
[Auto]
INT Pin 8 Assignment
[Auto]
5.2.7 PnP/PCI Configurations
