E4-2
GP2000 Series VM Unit User Manual
VIDEO INPUT SIGNAL
Select from "NTSC" or "PAL".
VIDEO MODE
Select from "COMPATIBLE" (with GP-570VM), and "EXTEND".
This setting allows you to adjust the video image display quality.
To display the setting screen, select the "INITIALIZE", "SYSTEM ENVIRONMENT
SETUP" and "VIDEO DISPLAY ADJUSTMENT" screens. (This menu is displayed
only when the VM Unit is installed.)
The current video image appears on the left of the screen. You can adjust the screen
while viewing the actual display.
4.1.2
VIDEO DISPLAY ADJUSTMENT
VIDEO DISPLAY ADJUSTMENT (1/4)
INPUT CHANNEL
Select video device's input channel (VIDEO IN 0 through 3).
MODE
Select whether the input from the video device is color or monochrome. Designate
this setting for each input channel used.
BRIGHTNESS
Adjust the brightness of the video window. Designate this setting for each input
channel used.
CONTRAST
Adjust the contrast of the video window. Designate this setting for each input channel
used.
COLOR
Adjust the color of the video window. Designate this setting for each input channel
used. This setting is disabled when "MODE" is set to "Mono".
DEFAULT
Resets "BRIGHTNESS", "CONTRAST" and "COLOR" to the middle value "8".
Touch the
key to display the next screen.
