E3-2
GP2000 Series VM Unit User Manual
3.2
Cable Connection
Connecting a Video Cable
Connect a BNC connector to one of the VIDEO IN 0 to 3 connectors. Turn the BNC
connector one-quarter turn to lock it in place.
VIDEO IN 0 to 3
RGB IN
RGB OUT
Recommended Connector:
BNC-P-3DV-SA <made by HIROSE DENKI>
Recommended Cable
:
3C-2V Coaxial cable
Recommended connector
:
XM4K-1543 <made by OMRON>
Recommended cover
:
XM2S-0913 <made by OMRON>
Recommended RGB cable (with connectors at both ends):
FP-CV00 (2.5m) <made by Pro-face>
FP-CV01 (5.0m) <made by Pro-face>
• Connect the cables before starting up the PC/monitor and the GP/
GLC/ABS. To prevent a possible equipment malfunction, do not dis-
connect the cable while the equipment is turned ON.
• The RGB input and output connectors have similar shapes. Confirm
that the connector is correct before attaching it.
• Be sure to design your system so that length of the RGB Output cable
does not exceed 5 meters.
Connecting an RGB Cable
Connect a D-sub 15 pin connector to either of RGB OUT or RGB IN. Secure the
connector in place with its attachment screws. (left and right side)
