E1-1
GP2000 Series VM Unit User Manual
1.1
VM Unit Features
The VM Unit allows you to display images from external video cameras or from a PC
on the GP/GLC/ABS screen. You can also use the VM Unit to output GP/GLC/ABS
screen images to other devices.
• External Video Camera (VIDEO) input is supplied via four (4) connectors, and PC
monitor (RGB) input is via a single D-sub connector, for a total of five inputs.
These inputs can be used to create up to four (4) video displays on your GP/GLC/ABS
screen.
• The VM Unit provides the GP/GLC/ABS with a single video (RGB) output, which
allows the display of GP/GLC/ABS screen images on a PC monitor.
• GP/GLC/ABS screen data can also be captured, converted to a JPEG file and saved
to a CF Card. JPEG images on a CF Card can also be read in by the GP/GLC/ABS
and displayed.
Chapter 1 : OVERVIEW
1.2
System Design
The following diagram represents the connection example.
*1 When the VM Unit is installed in the GP/GLC/ABS, the Bus Conversion Unit
(PSL-CONV00) cannot be used. Also, the Expansion Unit Interface 1 and VM
Unit Interface cannot be used simultaneously with AGP-35*0T.
GP/GLC/ABS
VM Unit
*1
Personal Computer
Monitor, Projector, etc.
Video Camera, VCR, Tuner, etc.
(1) VM BUS:
Connects to the GP/GLC2000 Series Expansion Unit's
EXT2 I/F or GP/ABS3000 Series VM Unit I/F.
(2) RGB OUT:
Uses an RGB cable.
(3) RGB IN:
Uses an RGB cable.
(4) VIDEO IN (0 to 3): Uses a video cable.
(1)
(2)
(3)
(4)
