E2-9
GP2000 Series VM Unit User Manual
The following external dimensions are for a VM Unit that is attached to a AGP-36*0T/
ABS-3600T.
Unit : mm [in.]
27 [1.06]
3 [0.12]
100 [3.94]
• The length given here for the RGB cable's protrusion from the VM Unit is
when the recommended cables (FP-CV00 or FP-CV01 <made by Pro-face>)
are used.
• When installing the cable, be sure to consider the cable material and the
amount of force to be put on the cable.
• The maximum bendable radius of the video cable varies depending on the type
of cable used. Check the cable specifications prior to installation.
• CE Marking regulations require the attachment of a Ferrite Core (included) to
each video cable used (except ABS3000 series unit that does not comply with
CE standards).
• Be sure to design your system so that after the GP/ABS unit is in-
stalled there is sufficient space for the VM Unit's connectors and
cable routing.
• When installing or removing the GP/ABS unit while its connectors
attached, be sure not to damage any of the connectors.
Ferrite Cores
(The figure shows the AGP-3650T.
ABS-3600T's figure, as well.)
