30/34
4.5 Cable Diagram at the time of replacement
The connetion cable used for ST3000 series can be also used for GP-4201TM. But,
please note that there are the precautions and restrictions as described below.
・
Please check the connection configurations GP-4201TM supports with GP-Pro EX
Device/PLC Connection Manual before using the connection cable.
(
http://www.pro-face.com/otasuke/files/manual/gpproex/new/device/index.htm
・
The cable used for connection to ST3000 series via COM2 can be used for
GP-4201TM with a COM Port Conversion Adapter (CA3-ADPCOM-01) added in the
following cases;
In all other cases, the operation is not guaranteed and it's recommended to prepare
a new connection cable. To check the cable diagram, please refer to GP-Pro EX
Device/PLC Connection Manual.
