16/34
3.3 Receive screen data from GP/ST3000 series
This section explains, as an example, how to receive screen data from ST3000 series
using a transfer cable, CA3-USBCB-01. If you have backed up screen data, this step is
unnecessary; skip to the next section [
3.4 Change the Display Unit type
(1)
Connect a USB transfer cable to a unit of ST3000 series.
(2)
Make sure that the [Device] in the “Transfer Settings Information” is set to [USB].
If not, click the [Transfer Setting] button to open the “Transfer Setting” dialog box.
Select [USB] in the Communication Port Settings field and click [OK].
