Pro-face GP-3310T Replacement Manual Download Page 37

Page: 37 / 41

4.4 Multilink Connection

For the communication drivers that support serial multi-link, see [

Which drivers

support serial multilink communication?

]

(

http://www.pro-face.com/otasuke/files/manual/gpproex/new/device/com_mlnk.ht

4.5 Cable Diagram at the time of replacement

The connection cable for GP-3310T can be used for GP-4401WW.
But please note that

there are precautions and restrictions as described below.

・

When a RS-422/485 device is connected via the COM1 port,

it will be connected

via the COM2 port of GP-4401WW.

(The cable diagram can be still used.)

Before GP-4401WW is connected, be sure to change the port setting to COM2 on
the Device/PLC setting. Also, please check the communication settings with
GP-Pro EX Device/PLC Connection Manual just in case.
(

http://www.pro-face.com/otasuke/files/manual/gpproex/new/device/index.htm

)

Summary of Contents for GP-3310T









































Search results

Summary of Contents for GP-3310T

Reviews:

Related manuals for GP-3310T

Brands by name

Popular brands

Pro-face GP-3310T, Replacement Manual

Search results

Summary of Contents for GP-3310T

Reviews:

Related manuals for GP-3310T

Brands by name

Popular brands