Pro-face FP5000 Series, User Manual

Page: 34 / 95

Specifications
34
Environmental Specifications
NOTE: When using any of the options for this product, make sure to check the specifications for
any special conditions or cautions that may apply to this product.
Air quality requirements
Do not operate or store the panel where chemicals evaporate, or where chemicals are present in
the air:

Corrosive chemicals: Acids, alkalines, liquids containing salt.

Flammable chemicals: Organic solvents.
Physical e
nvironmen
t
Surrounding air
temperature 0...60

C (32...140

F)
Storage temperature -20...60

C (-4...140

F)
Surrounding air and
storage humidity 10%...90% RH (non-condensing, wet bulb temperature 39

C [102.2

F] or
less)
Dust
0.1 mg/m
3
(10
-7
oz/ft
3
) or less (non-conductive levels)
Pollution degree For use in Pollution Degree 2 environment
Corrosive gases Free of corrosive gases
Atmospheric pressure
(operating altitude) 800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical envir
onment
Vibration resistance IEC/EN 61131-2 compliant
5...9 Hz single amplitude 3.5 mm (0.14 in)
9...150 Hz fixed acceleration: 9.8 m/s
2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock resistance IEC/EN 61131-2 compliant
147 m/s
2
, X, Y, Z directions for 3 times
Electr
ical enviro
nment
Noise immunity Noise voltage: 1,000 Vp-p
Pulse duration: 1

s
Rise time: 1 ns
(via noise simulator)
Electrostatic discharge
immunity Contact discharge method: 6 kV (IEC/EN 61000-4-2 Level 3)
CAUTION
INOPERATIVE EQUIPMENT
Do not allow water, liquids, metal, and wiring fragments to enter the panel case.
Failure to follow these instructions can result in injury or equipment damage.