4 LED MOTION SENSOR LIGHT
PELL0008
Please read these instructions carefully before use and retain for future reference.
•
Avoid locations of high temperature or humidity.
•
For indoor use only.
•
If the light output becomes less bright or flashes, replace the batteries.
•
Always remove the batteries if the light is not to be used for long periods.
•
Never mix new and old batteries or mix different battery types.
•
Remove the rear cover and insert the batteries noting the correct polarity.
•
Replace the cover and slide the switch to either on or auto position.
•
Drill a hole in the wall where required with regard to any concealed wiring or pipework.
Fit a wall plug if required and screw in a
dome head screw leaving the head 4mm
proud of the surface.
•
Locate the keyhole slot in the rear of the
light unit over the screw
head and ensure the light
is securely fixed.
IMPORTANT SAFETY INFORMATION
INSTALLATION
Keyhole slot
Switch
Batteries