7
Resonant frequency, fs
160 Hz
Overall diameter
93.5 mm (3.68 in)
D.C. Voice coil resistance, Re
5.6
Ω
Bolt circle diameter
85 mm (3,35 in)
Mechanical Quality Factor, Qms
8
Baffle cutout diameter:
Electrical Quality Factor, Qes
0,52
- Front mount
75.9 mm (2,98 in)
Total Quality Factor, Qts
0,49
Depth
46 mm (1.81 in)
Equivalent Air Volume to Cms, Vas
0679 l
Net weight
0.57 kg (1,25 lb)
Mechanical Compliance, Cms
430
μm / N
Mechanical Resistance, Rms
0,28 kg / s
Efficiency,
η0
0,5
Effective Surface Area, Sd
0,003 m2
Maximum Displacement, Xmax **
4.5 mm
Displacement Volume, Vd
13.5 cm3
Voice Coil Inductance, Le @ 1 kHz
0.25 mH
THIELE-SMALL PARAMETERS*
MOUNTING INFORMATION
* T-S parameters are measured after an exercise period
using a preconditioning power test. The measurements are
carried out with a velocity-current laser transducer and will
reflect the long term parameters (once the loudspeaker
has been working for a short period of time).
** The Xmax is calculated as (Lvc - Hag)/2 + (Hag/3,5),
where Lvc is the voice coil length and Hag is the air gap
height.
FREE AIR IMPEDANCE CURVE
OFF-AXIS FREQUENCY RESPONSE
FREQUENCY RESPONSE AND DISTORTION
Note: On axis frequency response
measured with loudspeaker standing
on infinite baffle in anechoic chamber,
1W @ 1m