Operation
Page EN-18
(16)
(15)
(15)
5. Once the grease filters are fully dry, insert
them with the pins (15) into the openings
(16) on the cooker hood.
( )
(13)
(14)
6. Push back the locks (13), press the
grease filter (14) in by pulling it upwards
and release the lock. The grease filter
engages.
g g
(12)
7. Lift the cover (12) up again and allow it to
click into place.
8. Switch the power back on.
Installing/replacing the
activated charcoal filter (only
for circulation air operation)
The activated coal filters remove odours.
They have to be replaced as soon as the
cooking odours can no longer be adequately
filtered.
If used frequently, you should change the fil-
ters regularly. Check them at least every 6
months.
For the source of supply, please see chapter
„Our Service Centre“ on page EN-22.
1. Unplug the mains plug or switch off the
corresponding circuit.
(12)
2. Lift the cover (12) up.
(13)
(14)
3. Push back the locks (13) on the grease fil-
ters (14) and carefully remove the grease
filters.
(18)
4. Only when replacing: Turn the activated
charcoal filters (18) in a clockwise direc-
tion and then remove them.