Priorit PRIODOOR ETX-RDA, Assembly And Operating Instructions Manual

Page: 7 / 21

7
Assembling the mounting frame

Use 4.5 x 80mm countersunk head screws
to screw together the upright and
transverse parts of the mounting frame.
Installing the mounting frame

Attention - shaft work: Protect yourself
and your tools against falling!

Place the mounting frame in the wall
opening.

Align vertically (plumb) and horizontally.

Arrange the all-round opening gap
uniformly.

Place packer material under the screw
fixing points. (Not included in the scope of
supply)

Let the transverse packer material at the
bottom protrude, it serves as a contact area
for the door element later.

Place packer material behind the vertical
frame.

Secure against falling out!