SOFTWARE
The standard customer-facing application for the system is called ‘Nanobench 6000’, and is included on the USB
stick
included in
the shipment. This also includes software or links to software which must be installed before the software can be used.
- Visual C++ Runtime
- Labview Runtime Engine
2017 SPI F3
‘Nanobench 6000’ runs on Windows XP, 7, 8, 10.
Once Nanobench and associated software has been installed and controller functional, go to
Windows Device Manager, and find
the COM port that the controller is connected to (e.g.‘COM12’).
Select the correct COM port within Nanobench 6000, then click ‘Connect’: At this point the software should connect to the
controller and begin reading the live measured position.
www.prior.com
Start Nanobench - the screen displayed will be similar to the one show below:
