Prio mini User Manual Download

Page: 63 / 102

PRiO User’s Guide

Enabling Auditory Feedback

You can include audio feedback in scans. To enable auditory prompts, choose

Menu

Settings

Auditory Scan

. When you are scanning, simply activate your switch. To retrieve a message, activate the

switch again after you hear the prompt.

Audio Output Device

When Use Headphone For Prompt is turned off, you can hear prompts through the device's speaker. You

may prefer to hear prompts through a headphone or earphone. This allows you, but not others, to hear

the prompts.
To hear prompts through a headphone or earphone, plug stereo headphones or earphones into the

headphone jack on the side of the device. Then choose

Menu

Settings

Use Headphone For Prompt

Choosing and Adjusting a Prompt Voice

When choosing a voice to use for auditory prompts, it can be helpful to choose a different voice than

the one the system uses for speaking messages. To change the voice:
1.

Choose

Menu

Settings

Prompt Voice

. A list of available voices opens.

To hear a voice before selecting it, tap the speaker icon located to the right of each voice.

When you decide which voice you want, tap the voice to select it.

Adjust the prompt voice

rate and pitch as needed.

To adjust the prompt voice rate:

To adjust the prompt voice rate, choose

Menu

Settings

Prompt Voice Rate

and drag the slider to the

right to increase the rate or to the left to decrease the rate.

To adjust the prompt voice pitch:

To adjust the prompt voice pitch, choose

Menu

Settings

Prompt Voice Pitch

and select a pitch level:

Lowest, Lower, Low, Normal, High, Higher, or Highest.

Summary of Contents for mini







































































































Search results

Summary of Contents for mini

Reviews:

Related manuals for mini

Brands by name

Popular brands

Prio mini, User Manual

Search results

Summary of Contents for mini

Reviews:

Related manuals for mini

Brands by name

Popular brands