Prio mini User Manual Download

Page: 60 / 102

PRiO User’s Guide

Setting

Description

Number of Rescans

Set the number of times you want a page scan to repeat automatically before

you activate your switch. Once you reach the set number of rescans, the scan

will stop until you activate your switch again.
Choose

Number of Rescans

and select the number of rescans you want. For

example, if you select

as the number of rescans, the device will scan the page

and then the scan will repeat automatically two more times unless you activate

your switch.

Note:

If you select

, scans will not repeat automatically.

Number of Switches

Set the number of switches you connected to the device to use for scanning.

Select

Number of Switches

and select

1 Switch

2 Switches

Configuring Switches

To use an external switch, plug the switch into either switch jack A or switch jack B on the side of the

device. If you are using two switches, plug a switch into each.

To enable scanning, choose

Menu

Settings

Scanning Enabled

To set the number of switches you connected to the device, choose

Number of Switches

Select

1 Switch

2 Switches

Configure additional settings as needed.

Setting up Touchscreen Scanning

There are times when a user is not capable of activating specific areas on the screen. For example,

maybe the user does not have the pointing skills to press one button. Using the touchscreen to scan

allows the user to tap anywhere on the screen to initiate a scan of the buttons. In this scenario, the

device screen acts as a single switch.
1.

Choose

Menu

Settings

Scanning Enabled

Choose

Use Screen As Switch

Configure additional settings as needed.

Setting up Auto Scanning

You can choose to have scanning activate automatically, or you can choose to either hold the switch or

step to each location. When Auto-Scan is turned on, scanning activates automatically. When Auto-Scan

is turned off, a switch activation is required to move the scan through each button, one at a time.
To set scanning to activate without holding a switch, choose

Menu

Settings

Auto-Scan

Summary of Contents for mini







































































































Search results

Summary of Contents for mini

Reviews:

Related manuals for mini

Brands by name

Popular brands

Prio mini, User Manual

Search results

Summary of Contents for mini

Reviews:

Related manuals for mini

Brands by name

Popular brands