Prinzen PSPC5, Service Manual, Page: 9 / 73

INTRODUCTION
SM-PSPC5-01-E/12-2007 SERVICE MANAUL PSPC5 Page 9 of 73
LIABILITY
Prinzen BV cannot be held responsible for any costs, damage or personal injury if it’s system is not
used in accordance with the instructions as described in this manual.
Since Prinzen BV is constantly improving its systems it may be possible that there are small
differences between your system and this manual.
Though this manual has been put together with the utmost care, Prinzen BV cannot accept any
responsibility for costs, damage or personal injury arising from any fault and/or incompleteness in the
content of this document.
GENERAL
This manual is intended to be used by service engineers of Prinzen and its official dealers. It contains
important information concerning safety and adjustment of the Prinzen BV system. For uncomplicated
functioning of the system, read this manual carefully and adjust according to the directions in this
manual.
Beside the design and the used materials also the correct adjustment of the system has great impact
on the functioning, the life span and the operational costs of the system.
This manual will help you to gain knowledge for correct adjustment of the system.
A Prinzen BV system meets the demands, mentioned in the European machine guideline (CE).
COPYRIGHT
Prinzen BV ©
This document contains confidential information and information protected by
copyright of Prinzen BV. Reproduction or transmission of any part of this
document to third parties, or the use thereof is only permitted after express
written permission of Prinzen BV.
All rights rest with Prinzen BV, Aalten, The Netherlands.
Written by Visser Machine Services.