Prinzen PSPC5, Service Manual, Page: 26 / 73

INSTALLATION
Page 26 of 73 SERVICE MANUAL PSPC5 SM-PSPC5-01-E/12-2007
ELECTRICAL CONNECTION
OUTPUT CONVEYOR TO
PACKER
10. Place the cables from the output conveyor
into the electrical cabinet of the packer.
11. Put the 4 plugs into their belonging
connector. The connectors are positioned
in the right top corner of the electrical
cabinet.
12. Each plug/connector is protected against
wrong plug insertion. There are 4 unique
plug connector combinations.
VACUUM HEAD PROTECTION
ATTENTION!
Never change the position of the vacuum head
by hand when the systems power supply is off.
This results in a lost encoder position and may
damage the system when started.
13. Remove the wooden support that protects
the vacuum head during transportation.
14. Place the transparent protection screen for
the vacuum head movement.
13
10
11
11
12
12
14