Printronix SLPA7000e, Training Manual And Reference Manual

Page: 35 / 76

QUICK SETUP Menu Items
35
•
Inv. Landscape . Inverse Landscape refers to horizontal orientation,
where the width of a page is greater than its height. The top edge of the
image is parallel to the right edge of the media. The following example is
viewed from the front of the printer.
NOTE: Inverse Landscape orientation applies to PGL and VGL emulations.
This is regarded as Landscape using PPI/ZGL.
Gap/Mark Sensor
Specifies the sensor type needed for detecting the top-of-form position on
media with label length indicators (gaps, notches, holes, or black marks).
•
Disable . Select when using media with no label length indicators (no
gaps, notches, holes, or black marks), or when you want the printer to
ignore all existing label length indicators on the installed media.
NOTE: When you select Disable, the length of each label is based on the
Label Length value entered.
•
Mark . Select when using media that has horizontal black marks located
on the underside of the label liner or tag stock. The
top-of-form position is the leading edge of the black mark.
4 inches
FEED
6 inches
The top edge of
the image is
parallel to the
trailing edge of the
media.
Leading Edge
Trailing Edge
4 inches
FEED
6 inches
T
h
e t
o
p e
d
g
e
of
th
e i
m
ag
e i
s
p
a
ra
llel
to th
e r
igh
t
e
dge
of the me
dia
.
Leading Edge