Printronix P5005B, User Manual

Page: 92 / 366

Chapter 4
Configuration Overview
92
Changing Parameters Example
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. In the configuration
menu above, and in all the configuration menus in this chapter, the
factory default values are indicated by an asterisk (*).
Your print jobs may require parameter values which vary from the
default settings. This section provides an example procedure for
changing individual parameter values.
The following procedure shows how to change and save the
settings for the Slow Paper Slew and Power Saver options. Use
these guidelines to navigate the configuration menus and change
other parameters.
. . .
OFFLINE
CONFIG.
CONTROL
PRINTER
CONTROL
Unidirectional PMD Fault Open Platen
@ BOF
Slow Paper
Slew
Power Saver
Time
Tear Bar
Distance Shuttle
Timeout
Disable*
Enable Enable*
Disable Disable*
Enable Disable*
Enable
15* - 60 Min.
Instant
5.12 in.*
(4.5-10.5 in.) 5 sec.*
(1-160 sec.)
* = Factory Default
Bar Code
Quality
Draft*
Dark
Recommended