Printronix P5005B, User Manual

Page: 204 / 366

Chapter 4
LinePrinter Plus Emulation
204
Proprinter XL Emulation
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF . Inserts an extra line feed after each carriage
return.
Printer
Protocol
(from page 181)
Define CR
Code
Auto LF Define LF
Code
FF valid at
TOF
Character
Set
Alt. Char
Set
20 CPI
Condensed
CR = CR*
CR = CR + LF Enable*
Disable LF = LF*
LF = CR + LF Enable*
Disable (see page 207) Set 1*
Set 2
Enable*
Disable
* = Factory Default
Proprinter
XL