Printronix P5005B, User Manual, Page: 155 / 366

Twinax Emulation
155
PTX Transparent
Lead-in Chars
You can enable additional features that are not available in
standard Twinax emulations. To access these features, send text
commands in the data stream. The commands must have a start
and end code. Three sets (each containing a start and end code)
are available:
•
Set 1 . start code: <%
stop code: >
•
Set 2 . start code:
¬¬
stop code: $
•
Set 3 . start code: _%
stop code: _
•
User Defined
Usr Defined HTRN
This option is used in Twinax SPC emulation. The range is ASCII
character. This option allows users to define ther own lead-in
characters for the Printronix Specific commands. Select a hex
value for the following codes for the User Defined option:
•
Start Code 1 5F
•
Start Code 2 5F
•
Stop Code 5B
Alt. Set 80-9F
•
Printable . Prints data in the range of hex 80 through hex 9F.
•
Control Code . Interprets data in the range of hex 80 through
hex 9F as a control code.