Printronix Network Interface Card, User Manual

Page: 263 / 378

Configuring AFP with CRTPSFCFG on V4R3 and Above (Optional)
263
Figure 35. Example CRTPSFCFG Command (V4R2 and above)
3. The following parameters are recommended: PSF
configuration (PSFCFG)
The name used for this PSF configuration object. The name must
match the user-defined object name (USRDFNOBJ) in the printer
DEVD.
PSF configuration (PSFCFG)
The name used for this PSF configuration object. The name must
match the user-defined object name (USRDFNOBJ) in the printer
DEVD.
IPDS pass through (IPDSPASTHR)
To print SCS files, specify *YES , PSF transforms SCS into IPDS
before printing.
Edge orient ............................... *NO *YES, *NO
Use outline fonts....................... *NO *YES, *NO
PSF defined option................... *NONE
+ for more values
Font substitution messages...... *YES *YES, *NO
Capture host fonts at printer..... *NO *NO, *YES
Font resolution for formatting ... *SEARCH *SEARCH, 240, 300
Font mapping table................... *NONE Name, *NONE
Library.................................. Name
Cut sheet emulation mode ........ *NONE *NONE, *CHKFIRST, *CHKALL
Use DBCS simulation fonts *NO *YES, *NO
Replace ..................................... *YES *YES, *NO
Authority .................................... *LIBCRTAUT Name, *LIBCRTAUT,
*CHANGE...