Printronix Network Interface Card, User Manual

Page: 185 / 378

NDS PSERVER Setup (Netware 4.x/5.x)
185
NDS PSERVER Setup (Netware 4. x/5.x)
There are a number of ways to configure the NIC for use in a Novell
NDS PSERVER setup. These include using the MPAdmin snap-in
for Netware Administrator, using generic print server objects in
Netware Administrator, or by using PCONSOLE. The following
steps describe a setup using a generic print server object in
Netware Administrator. Setups using PCONSOLE are less
common and will not be discussed.
To create a printer/print queue in an NDS environment using
Netware Administrator print server objects:
1. Log in to Netware Administrator as a user with security equal to
Admin on your Novell host.
2. Click the right mouse button on a branch in the tree in which
you would like to create a print queue object.
3. Select Create... from the pop-up menu. The New Object
dialogue displays.
4. Select Print Queue from the Class of new object list, and
click OK .
5. Select Directory Service Queue and type the name of the
queue into the Print Queue name field.
6. Fill in the Print Queue Volume field by typing in a volume or
browsing for one. Click Create .
7. Click the right mouse button on a branch in the tree in which
you would like to create a printer object.
8. Select Create... from the pop-up menu. The New Object
dialogue displays.
9. Select Printer from the Class of new object list and click OK .
10. Type the name of the printer in the Printer name field.
NOTE: The Printer object name must match one of the destination
names on the NIC. Most likely, this will be
d1prn
.