3
1. ODV2D-V2 Installation
Field Installation
This procedure is for use with the ODV2D-V2 assembly. The ODV2D-V2 is a precise measurement device. Once
properly installed, it will perform well in even harsh environments with reasonable care. Installation must be done by
trained service personal. This requires special tools and knowledge of the calibrating system with the printer.
Parts Included in the Field Kit (P/N P220340-001)
•
ODV2D-V2 Validator (P/N P220342-001) w/Mounting Bracket (P/N P220343-001)
•
Mounting Bracket Screws (3 ea. M4x10mm)
•
ODV2D-V2 Peel/Tear Door Assembly (P/N P220293-001)
•
ODV2D-V2 Interface PCBA (P/N P220141-001/spare P220291-001)
•
ODV2D-V2 Power/Data Ribbon Cable Assembly (P/N P200026-001)
•
Ferrite Core
•
Wire Saddle
•
Split Grommet
•
Cap for center-line access hole
•
Printronix Calibration Plaque (P/N P220237-001/spare P220292-001)
•
Package of 4x6 inch Direct Thermal Liner Gap Fanfold Media
•
Alcohol wipes (P/N P200016-002)
Required Tools and Materials
•
Static Wrist Strap
•
Long Nose Pliers
•
Flat Blade Screwdriver
•
Metric Hex Keys (2, 2.5, and 3mm
–
P200080-001, P200081-001, P200083-001)
•
Metal Square, 6in w/Bubble Level (P200084-001)
•
All special tools available in ODV2D Tool Kit (P/N P220329-001)
•
T8 Administrator’s Manual
(P/N 258745-001)
•
ODV2D User’s Manual (P/N P180045
-000)
T8X04 Printer Requirements
•
T8204 and T8304 4-inch wide printer only.
•
Media thickness range supported = 0.0025
–
0.010 inches.
•
Upgrading an older printer will require downloading new printer software.
•
Supports Continuous, Tear-Off Strip, Tear-Off, Peel-Off, Cutter*, and Batch Rewind Media Handling Modes.
NOTE:
*A Cutter option is available using the Cutter assembly designed specifically for use with the ODV2D-V2 (P/N
P220348-001)
