Panther T14R - Operation and maintenance manual
PRE-OPERATION INSPECTION
81/178
PUMP DRIVE OIL LEVEL
Figure 152
1. Oil level dipstick
2. Dipstick receptacle on pump drive
Figure 153
1. Oil level measurement position
Check oil level daily. Access the oil dipstick from the
access hole at the top of the cowling.
To check the oil level perform the following:
» Pull out the dipstick;
» Using a clean rag, wipe oil from the dipstick;
» Insert the dipstick in the receptacle, push the dip-
stick completely in (see previous figure);
CAUTION
Burn hazard
The oil level dipstick is located close the muffler
which becomes hot during operation. Take pre-
cautions when pulling out and re-inserting the
dipstick if muffler is hot.
0274670060
1
2
0275640023
1
» Pull it out again and check the level;
NOTE : The level must be between the marks of
the dipstick at ambient temperature. Top up with
recommended oil if level is low.
» Insert the dipstick in its receptacle completely.100