Panther T14R - Operation and maintenance manual
RECOMMENDED USE AND PRACTICES
24/178
IDENTIFICATION LABELS
The vehicle carries two identification labels. A third
label is present if a FOPS structure is installed on the
top of the cab. Located in the cab, they can be found
on the left side of the storage net. Refer to the next fig-
ures for the information found on the labels.
Figure 11
Identification labels in the cab of the vehicle
1. With CE marking
2. Without CE marking
Figure 12
Identification label dedicated to the FOPS structure
1. With CE marking
2. Without CE marking
4119450012
1
2
certifie que/
certifies that
4119450013
1
2
certifie que/
certifies that
4119450014
1
2
certifie que/
certifies that
Other identification plates can be found:
» on the diesel engine;
» on the hydrostatic motors;
» on the hydrostatic pumps;
» on the pump drive;
» on the hydraulic motor/gearbox for rotation.
When inquiring about service or ordering parts, please
quote the vehicle serial number, engine serial number
and hourmeter reading.
Emission control label
The emission control label is located on the right side
of the storage net in the cab.
Patents
This product is manufactured under patent pending.
For more information on patents, contact PRINOTH at
the address indicated in the present manual.