Princeton GTIB-30, Installation Manual

Page: 35 / 69

GTIB-30 Installation Manual-UL
4411-0011, Rev 2.0 35
3. Ensure that the enclosure is free standing and the space requirements are
complied with.
4. The enclosure is NEMA 3R rated and can be installed INDOORS or
OUTDOORS.
5. The maximum life of the inverter can be achieved by mounting the unit
in a clean, dry and cool location
6. For optimal inverter life and performance, do not mount the inverter in
direct sunlight, especially in hot climates.
7. The installation location should be sufficiently ventilated to prevent the
inverter heat output from increasing the ambient temperature beyond the
inverter’s rating.
8. Under certain operating conditions, the inverter will emit audible noise;
it is not advisable to install in the immediate vicinity of living quarters.
9. The inverter should not be installed in an area that is excessively dusty,
as this may decrease the performance of the air cooling system.
10. The inverter must not be installed in areas in which dust containing
conductive particles (e.g. iron filings) may form.
11. When installing the inverter, care should be taken to ensure that the
display unit remains at or below eye level.
12. Provisions should be made and/or procedures should be in place to
ensure that nothing is placed or stored to the right of the enclosure that
could block the ventilation louvers or prevent the enclosure door from
being opened.
13. The inverter weighs about 560 lbs. (254kg.) Verify load capacity of
mounting area.
14. Never mount the inverter any other way but upright.