6 Changing Components |
6.5 Changing the Microscope Network Adapter
44
Primotech | Document 430055-9044-008 V.1.0; 03 / 2014
6.5 Changing the Microscope Network Adapter
The procedure for changing a microscope network adapter (MNA) is the same for
the standard and advanced MNA.
Removing the MNA
To remove the MNA:
Procedure
1
Unplug the Ethernet cables connected to the MNA.
2
Use the 2.5 mm hex key to undo the four hexagonal bolts of the MNA.
1
2
3
Carefully remove the MNA from the stand.
Attaching the MNA
To attach the MNA:
Procedure
1
Place the MNA on the rear of the stand.
2
Use the 2.5 mm hex key to tighten the four hexagonal bolts of the MNA.
3
Attach the cables to the MNA:
– Network cable from the camera to the MNA
– Network cable from the MNA to the router