Primo Water RAVEN XR15, Manual

Page: 12 / 23

Things to consider
i. Ease of movement
ATTENTION: Prior to moving machine and/or cyclone make sure the
roaster is turned off, unplugged, and the gas is disconnected/off.
To move the roaster and/or cyclone the machine must be taken apart.
1. Remove exhaust arm by pulling it off via compression fittings and set aside.
2. Unbolt cyclone from ground if applicable.
(1) Use forklift to pickup machine from the back *make sure to tilt forklift
back once the roaster is lifted up to avoid it sliding off or tipping the
forklift*
3. Place roaster in desired location using the installation guide/spacing
requirements.
Make sure to leave ample room behind the machine in order to let forklift have
access for movement purposes.
*Every time the machine is moved, disassembled, & put back together the
operator must inspect machine prior to resuming operations*