SPECIFICATIONS: SYNC POE ANALOG CLOCK
Power over Ethernet (PoE) Analog Cocks receive both power and data from a PoE enabled network. Optionally, power
and data can be supplied with use of a Primex AC power adapter (optional accessory) and an Ethernet network.
Power over Ethernet
Compliant with IEEE 802.3af standard and compatible with 802.3at standard
Power
Input power: 48V, 6.25 Watts Max
Optional AC power adapter: 5V DC USB Mini B (5 pin) connector interface, 5 ft (1.5 m)
cable
Network
Communication
Protocols
• IP Addressing: Dynamic Hosting Configuration Protocol (DHCP); may also be
configured with static IPv4 address.
• Network Communication Protocol: Hypertext Transfer Protocol Secure (HTTPS)/TLS
• Data Packet Size: typically less than 5 kilobytes (kB)
Operation
• Automatically adjusts for Daylight Saving Time (DST)
• Automatically performs a daily midnight hand verification check. When check fails for
three (3) consecutive days, the clock enters a hand position failure status.
• If power is interrupted, the clock stops until power resumes. Upon resumption of
power, the clock self-corrects to the current time.
Environment
Operating Temperature Range: 32° to 95° F (0° to 35° C); indoor use only
Storage Temperature Range: -4° to 158° F (-20° to 70° C)
Certifications
FCC, CE, and IC compliant
Warranty
1 Year Limited Warranty
Page 4
