background image

Table of Contents

Specifications: Sync PoE Analog Clock ............................................................................................... 4
Analog Clock PoE install requirements  ............................................................................................... 5
Install Analog Clock: wall mount ........................................................................................................ 6

Supplied components  ............................................................................................................. 6
Wall mount with clock-lock hanger
  ............................................................................................ 6

Update Clock Name  ........................................................................................................ 7

Install Analog Clock: 16" dual-sided  ................................................................................................... 8

Dual clock kit supplied components ........................................................................................... 8
Assemble and install a 16" dual-sided clock ................................................................................. 9
Update clock name ...............................................................................................................  12

Update the name of a clock,  ...........................................................................................  12

IMPORTANT SAFETY INSTRUCTIONS  ..............................................................................................  13
REGULATORY APPROVALS  ............................................................................................................  14
EUROPEAN UNION DECLARATION OF CONFORMITY AND RESTRICTIONS  ..............................................  15
ONE YEAR LIMITED WARRANTY ......................................................................................................  16
Technical Support  ........................................................................................................................  17

Support through Primex Certified Sales and Service Partners  .......................................................  17
Primex Technical Support
  ......................................................................................................  17

Page 3

Summary of Contents for OneVue Sync C1005


















Reviews: